Horizontal Machine Center Operator
Air & Liquid System Corporation - Buffalo Pumps Air & Liquid System Corporation - Buffalo Pumps North Tonawanda, NY North Tonawanda, NY $27.
75 - $31.
62 an hour $27.
75 - $31.
62 an hour Description:
ELIGIBLE FOR $1000 SIGN-ON BONUS First, Second and Third Shift Positions Available Voluntary Overtime Available To set up and operate manually from tape, disc, and/or direct inputted programs CNC horizontal machining center equipment to perform various milling, drilling, tapping, boring, grooving, facing, tapering, cutting off, slotting and deburring to perform machining operations in conjunction with CNC equipment.
Receive instructions, print requirements, route cards, program tapes, and shop orders from Foreman, Programmer, Floor Inspector and Instructor.
Reads and interprets prints and set-up information to determine tool and set-up requirements.
Checks for proper material, part number, pattern number, heat number.
Loads machine manually, with hoist or crane, positions in fixture and/or aligns and clamps, calculates, layouts and checks for machining stock.
Operates CNC horizontal machining center and controls program offsets and edits as needed to mill, turn, face, bore, groove, slot, drill, tap, ream and taper castings forging, weldments of various materials.
Loads and unloads pallet shuttle internal to machining.
Checks and verifies dimensional and visual characteristics internal to machine cycle.
Selects, grinds, and sets-up proper tools as necessary.
Checks dimensions of rough and finished cuts against specifications, along with surface finish requirements using measuring devices such as calipers, micrometers, scales, dial indicators, gauges.
Works to.
0002 tolerance.
Notifies Foreman, Programmer, Tool Maker or Floor Inspector/Instructor of any unusual condition of material, misapplication of cutting tools, program problems or of any suspected malfunctioning equipment.
Disassembles, cleans, lubricates machine per required schedule.
Keeps immediate work area clean and orderly.
Requirements:
Interpret detailed prints, set up and operate CNC Horizontal Machining Center to perform precision type machining operations.
Reason through, plan work detail from complex blueprints to set-up and operate CNC Horizontal Machining Center.
Uses various tools and gages to operate CNC Horizontal Machining Center to mill, turn, face drill, tap, bore, ream, groove, slot, cut off, deburr, index table, pallet shuttle and etc.
Close attention and care required to prevent damage to cutting tools, gages and machine.
Operates Horizontal Machining Center where continuity of production is required.
Close mental or visual application required for setting up and operating Horizontal Machining Center to machine parts to close tolerances.
Moderate physical exertion.
Handles medium weight materials and tools.
Works on machine platform while loading and unloading parts and fixtures.
The above duties and responsibilities designated as essential job functions are subject to reasonable accommodation.
The job description is not intended to be construed as an exhaustive statement of duties, responsibilities, or requirements.
Employees may be asked to perform other job-related functions that are not listed above.
Working Hours:
1st shift - 7:
00am to 3:
30pm 2nd shift - 3:
30pm to 12:
00am 3rd shift - 10:
30pm to 7:
00am Voluntary Overtime Available Available benefits include:
Shift differential for 2nd and 3rd shift positions Medical/Dental/401k Paid Time Off Annual safety glasses and boot allowance Robust employee assistance program.
Estimated Salary: $20 to $28 per hour based on qualifications.
75 - $31.
62 an hour $27.
75 - $31.
62 an hour Description:
ELIGIBLE FOR $1000 SIGN-ON BONUS First, Second and Third Shift Positions Available Voluntary Overtime Available To set up and operate manually from tape, disc, and/or direct inputted programs CNC horizontal machining center equipment to perform various milling, drilling, tapping, boring, grooving, facing, tapering, cutting off, slotting and deburring to perform machining operations in conjunction with CNC equipment.
Receive instructions, print requirements, route cards, program tapes, and shop orders from Foreman, Programmer, Floor Inspector and Instructor.
Reads and interprets prints and set-up information to determine tool and set-up requirements.
Checks for proper material, part number, pattern number, heat number.
Loads machine manually, with hoist or crane, positions in fixture and/or aligns and clamps, calculates, layouts and checks for machining stock.
Operates CNC horizontal machining center and controls program offsets and edits as needed to mill, turn, face, bore, groove, slot, drill, tap, ream and taper castings forging, weldments of various materials.
Loads and unloads pallet shuttle internal to machining.
Checks and verifies dimensional and visual characteristics internal to machine cycle.
Selects, grinds, and sets-up proper tools as necessary.
Checks dimensions of rough and finished cuts against specifications, along with surface finish requirements using measuring devices such as calipers, micrometers, scales, dial indicators, gauges.
Works to.
0002 tolerance.
Notifies Foreman, Programmer, Tool Maker or Floor Inspector/Instructor of any unusual condition of material, misapplication of cutting tools, program problems or of any suspected malfunctioning equipment.
Disassembles, cleans, lubricates machine per required schedule.
Keeps immediate work area clean and orderly.
Requirements:
Interpret detailed prints, set up and operate CNC Horizontal Machining Center to perform precision type machining operations.
Reason through, plan work detail from complex blueprints to set-up and operate CNC Horizontal Machining Center.
Uses various tools and gages to operate CNC Horizontal Machining Center to mill, turn, face drill, tap, bore, ream, groove, slot, cut off, deburr, index table, pallet shuttle and etc.
Close attention and care required to prevent damage to cutting tools, gages and machine.
Operates Horizontal Machining Center where continuity of production is required.
Close mental or visual application required for setting up and operating Horizontal Machining Center to machine parts to close tolerances.
Moderate physical exertion.
Handles medium weight materials and tools.
Works on machine platform while loading and unloading parts and fixtures.
The above duties and responsibilities designated as essential job functions are subject to reasonable accommodation.
The job description is not intended to be construed as an exhaustive statement of duties, responsibilities, or requirements.
Employees may be asked to perform other job-related functions that are not listed above.
Working Hours:
1st shift - 7:
00am to 3:
30pm 2nd shift - 3:
30pm to 12:
00am 3rd shift - 10:
30pm to 7:
00am Voluntary Overtime Available Available benefits include:
Shift differential for 2nd and 3rd shift positions Medical/Dental/401k Paid Time Off Annual safety glasses and boot allowance Robust employee assistance program.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
